Hard Korr Power HKPBATL100P 100Ah Lifepo4 Deep Cycle Lithium Battery LCD Screen
Hard Korr Power HKPBATL100P 100Ah Lifepo4 Deep Cycle Lithium Battery LCD Screen
Our 100AH deep-cycle lithium batteries consist of four high quality aluminium-encased prismatic cells connected in series, each with a nominal voltage of 3.2v. Whilst more expensive to manufacture, prismatic cells are much more stable and shock-resistant than cheaper options which simply consist of banks of cylindrical cells wired together.
These batteries use an advanced battery management system (BMS) to ensure an even energy balance between cells and allow the batteries to be connected in parallel or series (up to 4). The BMS contains an intelligent protection circuit module which protects against overcharge, over-discharge, short-circuit and over-temperature.
Our battery cells are protected by custom-molded EVA rubber cushioning. This cushioning offers protection against knocks and drops, and ensures better stability and longevity when the batteries are used in high-shock and high-vibration environments such as marine and vehicle applications.
Specifications
Nominal voltage |
12.8V |
Capacity (C20) |
100Ah |
Max series/parallel config |
4S/4P |
Normal charge voltage |
14.6V |
Float voltage |
14.0V |
Discharge cut-off voltage |
10.0V |
Charge temp |
0°C-45°C |
Discharge temp |
-20°C-60°C |
Self-discharge |
<3% per month |
Initial impedance |
Less than 20mΩ |
Weight |
14.0kg |
Max charge current |
50A |
Max discharge current (constant) |
50A (0.5C) |
Max discharge current (40 min) |
100A* |
Max discharge current (2 min) |
150A* |
Pulse current (3 sec) |
200A* |
Dimensions |
324mm (l) x 173mm (w) x 216mm (h) |
Certifications |
UN/DOT 38.3, CE, RoHS |
* Note on discharge current: if you connect multiple batteries in parallel, the maximum discharge current is multiplied by the number of batteries in the array. For example, if you connect two of these batteries in parallel you can discharge at 200A for 40 minutes.
HKPBATL100P
Product Code: HKPBATL100P